You can clean an electric heater safely by first unplugging it, letting it cool down completely, and then removing dust dry with a soft brush, a vacuum cleaner with a soft brush attachment, or a dry cloth. Do not use water inside or on the heater and do not plug it back in until everything is dry.
Direct answer: unplug it, let it cool down, remove dust dry, wipe the outside with a slightly damp cloth (without water in the openings), and only then plug it back in.
Why is cleaning important?
Dust accumulates in the air vents and around the heating element. When that dust gets hot, it can give off a burning smell, as you read in why a new electric heater smells like burning dust. Moreover, a clogged grille can obstruct the airflow, causing the heater to emit less heat.
Step 1: switch off and let cool down
Turn off the heater and unplug it. Wait until the device has cooled down completely, because the heating element and the housing can remain hot for a long time after use. Never do this while the heater is switched on.
Step 2: remove the dust dry
Use a soft brush, a brush attachment, or a vacuum cleaner on the lowest setting with a soft brush attachment to remove dust from the grilles. Work carefully and do not force anything. Do not push sharp objects into the openings, as this can damage the device.
Step 3: wipe the outside
Wipe the housing with a slightly damp, well-wrung cloth and then dry it with a dry cloth. Do not use aggressive cleaning agents or abrasives. Let the heater dry for a while before plugging it back in. If in doubt, always consult the device's manual.
Also check the cord and plug
Check that the cord is not damaged and the plug is securely attached. Plug the heater directly into the socket, as explained in can you connect an electric heater to an extension cord. If the heater does not work properly after cleaning or if you see damage, do not use it and contact customer service.
Dynter HW2002 electric heater
The AirFlow HW2002 electric heater has a compact size and is therefore easy to move and dust.
Power: 1500 to 2000W
Size: 18 x 18 x 45 cm, 1.6 kg
Cable length: 1.7 meters
Controls: LCD touchscreen and remote control
Safety: overheating protection and fall detection
Also read if you can use an electric heater in the bedroom and how much a heater costs per hour.
Overview: what is and isn't allowed?
| Yes | No |
|---|---|
| Unplug and let cool down | Clean while the heater is switched on or hot |
| Soft brush or vacuum cleaner with a soft brush attachment | Stick sharp objects into the grilles |
| Slightly damp cloth on the outside | Use water inside or on the device |
| Let dry completely | Plug back in immediately after cleaning |
Choose a heater that is easy to maintain
View the HW2002 or discover all Dynter heaters.
Frequently asked questions
How often should I clean my electric heater?
Dust the heater at the beginning of the heating season and in between if you notice dust or a burning smell.
Can I clean an electric heater with water?
No. Do not use water inside or on the device. A slightly damp cloth on the outside is allowed, followed by drying.
Why does my heater smell like dust?
Dust that gets hot gives off a burning smell. Cleaning usually helps.
Can I use a vacuum cleaner?
Yes, on a low setting with a soft brush attachment, as long as the heater is switched off and cooled down.
How do I store a heater in the summer?
Clean it, let it dry completely, and store it in a dry place, preferably in the original packaging.